APEC 2024
Long Beach Convention Center, Booth 1615
300 E Ocean Blvd
Long Beach, CA 90802
United States
Join PI at AEC 2024 in Long Beach, California.
Visit Booth 1615 and attend a full lineup of expert sessions where our technical experts will share insight into our newest innovation in AC-DC conversion, gate drivers, motor drivers and automotive solutions that offer the highest level of integration and efficiency.
Product Launch
PI just announced the new InnoMux-2 flyback switcher ICs for multi-output power supplies. The groundbreaking new devices are a single-chip, single-stage solution that regulates output voltages and currents independently within ±3% accuracy, eliminating DC-DC converters, cutting component count by 50% and significantly reducing switching losses.
Watch the Introduction Video.
Featured Products
Visit the product pages below to learn more or to download the data sheets and flyers about the highly integrated, ultra-reliable, high efficiency products we are showcasing at APEC 2024.
AC-DC CONVERSION
Event Gallery
More to See
Visit our partners at the following booths and check out more live demos featuring PI products and reference designs:
DigiKey - Booth 1821
- RDK-877 6 W Isolated Flyback Power Supply with Lossless Generation of AC Zero Crossing Signal (LinkSwitch-TNZ)
Mouser Electronics - Booth 1213
- RDK-942 65 W USB PD 3.0 + PPS Power Supply, featuring InnoSwitch4-Pro (PowiGaN) and ClampZero
Premier Magnetics - Booth 1816
Plenary Session
Monday, February 26
- Innovating for Sustainability and Profitability:
How Innovations in Efficiency Enable Us to Do Good for the Environment while Doing Well as a Business
2:30 PM PST, Balu Balakrishnan, Chairman and CEO, Power Integrations
Location: Grand Ballroom
Exhibitor Presentation
Tuesday, February 27
- Achieve High Efficiency and Excellent Output Regulation in Multi-Output Power Supply Designs Without DC-DC Converters
1:30 PM – 2:00 PM, Han Cui, MSc
Location: Exhibition Floor Stage
Industry Session Schedule
Our team of technical experts are out in full force, bringing 14 insightful presentations to the industry sessions at the show. Click on the links below to see details.
Tuesday, February 27
IS03 - Gate Driver Applications
- IS03.1 - ASIL-D Ready Automotive Compliant Plug & Play High Performance Gate Driver
8:30 AM – 8:55 AM, Mike Cramer, Dipl. -Ing.
Location: Room 203A/B
IS05 - Motor Drive Applications
- IS05.3 - Motor Drive Compensation System for a Passive Valley-Fill Power Factor Correction Stage
9:20 AM – 9:45 AM, Juan Paolo Quismundo, MSc & Mark Tarvina
Location: Room 201B
IS06 - Design of Power Supplies and Battery Chargers
- IS06.1 - Parallel Boost Converter Operation with 1kW Output Power, 180-264 VAC Input
8:30 AM – 8:55 AM, Richard Hester - IS06.3 - 240W USB PD EPR Stacked Power Supply for Residential DC-DC Bus Architecture
9:20 AM – 9:45 AM, Sudhakarababu Chakkirala, PhD - IS06.5 - E-Scooter Battery Charger with Wide Range CV and CC Operation Modes
10:40 AM – 11:05 AM, Sudhakar Singamameni - Location: Room 203C
Wednesday, February 28
IS12 - Magnetics & EMI
- IS12.2 - Common-Mode EMI of Valley Switched Flyback Converters
8:55 AM – 9:20 AM, Ron Israel Nueda
Location: Room 203C
IS09 - GaN Auxiliary & Automotive Solutions
Session Co-Chair: Rahul Joshi, Director of Automotive Topology & Architectures, Power Integrations
- IS09.4 - Ultra-Wide Input Voltage (40 VDC – 1000 VDC) Flyback Design for Automotive Applications
9:45 AM – 10:10 AM, John Mardy Rongavilla - IS09.6 - 250 W, 400 V Input GaN-Based Active Clamp Flyback Converter for Automotive Battery Elimination
11:05 AM – 11:30 AM, Felix Budde, MSc - Location: Room 203A/B
IS16 - WBG & Silicon Power Devices
Session Co-Chair: Kamal Varadarajan, PhD, Principal Device Engineer Senior Manager, Technology Development, Power Integrations
- IS16.3 - 1250V GaN Enables Extension of Innoswitch to High Voltage, High-Reliability Applications
2:20 PM – 2:45 PM, Kamal Varadarajan, PhD
Location: Room 201A
IS17 - Topologies in Consumer Applications
- IS17.2 - Boost PFCs in DCM Mode with Integrated Gallium Nitride Switch: Parallel vs. Semi-Bridgeless Configurations
1:55 PM – 2:20 PM, Sudhakarababu Chakkirala, PhD - IS17.4 - Eliminating Audible Noise from Subharmonic Frequencies in a Multi-Output Flyback
2:45 PM – 3:10 PM, Han Cui, MSc & Yi Li - IS17.7 - Flyback Zero Voltage Switching Using Adaptive Synchronous Rectifier On-Time
4:30 PM – 4:55 PM, Karl Moore, MEng - Location: Room 201B
Thursday, February 29
IS23 - Component Packaging, Protection and Safety
- IS23.1 - Circuit for Disabling Inrush Shorting Protection Relay During Light/No-load Condition
8:30 AM – 8:55 AM, Richard Hester - IS23.3 - Package Safety Isolation Testing for Integrated Power Devices
9:20 AM – 9:45 AM, Thomas Anthony Ferrer Capobianco
Location: Room 201B
IS22 - Reliability of WBG Power Devices
Session Co-Chair: Karthick Murukesan, Staff Device Engineer, Technology Development, Power Integrations
- 8:30 AM – 11:20 AM
Location: Room 201A
