解决方案搜寻 技术支持

牵引逆变器

Traction Inverter IconIn the high-voltage electrical system of a car, truck or bus, the traction inverter sits between the high voltage system battery and the electric motor. It converts the HV system DC voltage into 3 AC output phases to drive the motor.

The combination of the inverter and motor is a key component in an EV, determining the performance, driving feel and dynamics. The range of a vehicle is directly related to the efficiency of the traction inverter and motor across the driving profile, including acceleration, steady state and energy recovery into the battery via regenerative braking.

Power Integrations offers automotive qualified gate drivers and power supply ICs for the traction inverter which increase efficiency while saving space and cost and meeting functional safety. Reinforced isolation, extended creepage distance packages meet latest requirements for vehicles moving to 800 V architectures.

参考设计

Additional Documents
设计
产品
RDR-707Q - 9.75 W Non-Isolated Buck Power Supply using Automotive-Qualified LinkSwitch-TN2Q
Product LinkSwitch-TN2Q
DER-956Q - 13 W Dual Output Power Supply for 800 V Bus Using InnoSwitch3-AQ (1700 V SiC Switch)
Product InnoSwitch3-AQ
DER-946Q - 10 W, 7.5 V Output Power Supply for 800 V Bus Using InnoSwitch3-AQ (1700 V SiC Switch)
Product InnoSwitch3-AQ
RDHP-2250Q - Adapter Board for SCALE EV Gate Driver Board
Product 2SP0215F2Q0C
DER-913Q - 35 W Power Supply for 800 V Bus with 40-1000 VDC Input Using InnoSwitch3-AQ (1700 V SiC Switch)
Product InnoSwitch3-AQ
RDR-919Q - 60 W Power Supply for 800 V Bus with 50-1000 VDC Input Using InnoSwitch3-AQ (1700 V SiC Switch)
Product InnoSwitch3-AQ
DER-926Q - 13 W Triple-Output Power Supply for 400 V Bus with 40-530 VDC Input Using InnoSwitch3-AQ
Product InnoSwitch3-AQ
DER-889Q - 15 W Power Supply for 800 V Bus with 30-1200 VDC Input using InnoSwitch3-AQ
Product InnoSwitch3-AQ
DER-719Q - 2.7 W StackFET Buck Power Supply using Automotive-Qualified LinkSwitch-TN2Q
Product LinkSwitch-TN2Q
DER-907Q - 20 W Power Supply for 400 V Bus with Planar Transformer Using InnoSwitch3-AQ
Product InnoSwitch3-AQ
DER-859Q - 30 W Power Supply for 800 V Bus with 30-925 VDC Input Using InnoSwitch3-AQ
Product InnoSwitch3-AQ
RDR-840Q - 30 W Power Supply for 400 V Bus with 30-550 VDC Input Using InnoSwitch3-AQ
Product InnoSwitch3-AQ
DER-844Q - 4.5 W Non-Isolated Buck Power Supply using Automotive-Qualified LinkSwitch-TN2Q
Product LinkSwitch-TN2Q

相关产品

Related Products
产品
数据手册
拓扑结构
电压等级
产品描述
Data Sheet 查看PDF
Topology Integrated Half-Bridge
Power Level
Description

适用于耐压在1200V以内的Infineon™ EconoDUAL™ 17mm IGBT功率模块且已通过ASIL认证的即插即用型双通道门极驱动板

Data Sheet 查看PDF
Topology Flyback, Secondary Side - FluxLink Regulated
Power Level 70 W
Description

适合汽车应用的集成750 V、900 V及1700 V开关和FluxLink反馈技术的恒压/恒流准谐振反激式开关IC

Data Sheet 查看PDF
Topology Non-Isolated Flyback, Buck/Boost/Buck-Boost
Power Level 850 mA
Description

适合汽车应用的集成了系统级保护的高能效开关IC,可实现低元件数的电源设计

Data Sheet 查看PDF
Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Power Level
Description

汽车级单通道SiC MOSFET和IGBT门极驱动器,可提供高级有源钳位和加强绝缘

Data Sheet 查看PDF
Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Power Level
Description

汽车专用可提供加强绝缘的单通道IGBT/MOSFET门极驱动器

补充文件