Using copper pour for secondary GND on InnoSwitch3-CE
Posted by: latk
on
Hi, can I use copper pour/plane for the secondary side GND on InnoSwitch3-CE.
Is the secondary side ground the IS pin or the GND pin.
Hi, can I use copper pour/plane for the secondary side GND on InnoSwitch3-CE.
Is the secondary side ground the IS pin or the GND pin.
© 2024 Power Integrations. All Rights Reserved
Hi Latk,
Thanks for choosing PI product. The secondary GND terminal of InnoSwitch3-CE must be connected directly to the output capacitor GND Terminal. The secondary side IC grounding is the GND pin not the IS pin. IS pin is for output current sensing.