24vdc, 2.2A power supply recomendation
Posted by: kevinkratzer
on
What Power Integrations' device would you recommend for a universal 120/240 VAC input, providing 24 volt DC at 2.2 Amps. The maximum current I would draw from it would likely be 1.6 amps for 70% loading. The board will be brought through cUL and CE. It is for industrial use, so there should be no efficiency worries. This is pretty general. Would you happen to have a transformer or a complete design.
I would suggest a TOPSWITCH (JX or HX family)
You can download PI Expert from the below link
This program will simplify your design
http://www.powerint.com/en/design-support/pi-expert-design-software