Solution Finder Get Tech Support


Energy-Efficient, Off-Line Switcher with Line-Compensated Overload Power


Product Details

With line-compensated overload power protection, TinySwitch-4 devices dramatically reduce the maximum overload variation over the universal input voltage range. It is particularly helpful in applications such as PC standby and CV adapters to limit the maximum output power during the overload fault condition.

TinySwitch-4 also incorporates a 725 V MOSFET that easily allows 80% de-rating for high reflected voltage and high bus voltage designs. The BP/M pin permits the MOSFET current limit to be adjusted up or down, allowing designers to optimize power delivery and efficiency in a variety of physical implementations. An on-time extension function extends the low-line regulation range, enabling hold-up time to be met with lower values of input capacitance.

Product Highlights

Lowest System Cost with Enhanced Flexibility

  • 725 V rated MOSFET
    • Increases BV de-rating margin
  • Line compensated overload power – no additional components
    • Dramatically reduces max overload variation over universal input voltage range
  • ±5% turn on UV threshold: line voltage sense with single external resistor
  • Simple ON/OFF control, no loop compensation needed
  • Selectable current limit through BP/M capacitor value
    • Allows optimum TinySwitch-4 choice by swapping devices with no other circuit redesign
  • Tight I2f parameter tolerance reduces system cost
    • Maximizes MOSFET and magnetics utilization
  • ON-time extension – extends low-line regulation range/hold-up time to reduce input bulk capacitance
  • Self-biased: no bias winding or bias components
  • Frequency jittering reduces EMI filter costs

Enhanced Safety and Reliability Features

  • Accurate hysteretic thermal shutdown protection with auto¬matic recovery eliminates need for manual reset
  • Auto-restart delivers <3% of maximum power in short-circuit and open loop fault conditions
  • Output overvoltage shutdown with optional Zener
    • Fast AC reset with optional UV external resistor
  • Very low component count enhances reliability and enables single-sided printed circuit board layout
  • High bandwidth provides fast turn-on with no overshoot and excellent transient load response

EcoSmart – Energy Efficient

  • Easily meets all global energy efficiency regulations
  • No-load <30 mW with bias winding, <150 mW at 265 VAC without bias winding
  • ON/OFF control provides constant efficiency down to very light loads – ideal for mandatory CEC regulations and EuP standby requirements


  • PC Standby and other auxiliary supplies
  • DVD/PVR and other low power set top decoders
  • Supplies for appliances, industrial systems, metering, etc
  • Chargers/adapters for cell/cordless phones, PDAs, digital cameras, MP3/portable audio, shavers, etc.


Output Power (Max) - Open Frame, 230V 19.00 W
Output Power (Max) - Enclosed, 230V 10.00 W
Output Power (Max) - Enclosed, Univ 7.00 W
Output Power (Max) - Open Frame, Univ 15.00 W
Breakdown Voltage 725 V
Voltage - Input (Min) 85 V
Voltage - Input (Max) 265 V
Auto-Restart & Overvoltage Response Latch Off
IC Package PDIP-8C
Internal Switch Yes
Mounting Type Through Hole
Over-Temperature Response Hysteretic
Temperature - Operating (Min) -40 °C
Temperature - Operating (Max) 150 °C
Control Scheme Secondary-side
Control Features
Selectable Current Limit
Frequency Jittering
Auto-Restart/Latching Fault Response
On/Off Control
Protection Features
Output Undervoltage
Output Overvoltage
Output Short Circuit
Output Open Loop
Line-compensated Overload
Output Profile CV
Topology Flyback
Product Sub-Type PMIC
Secondary Response Auto-restart