SID1102K
Up to 5 A Single Channel IGBT/MOSFET Gate Driver Providing Reinforced Isolation up to 1200 V IGBT and MOSFET
Product Details
The SID1102K is a single-channel IGBT and MOSFET gate driver in an eSOP wide body package. Reinforced galvanic isolation is provided by Power Integrations’ innovative solid insulator FluxLink™ technology. Up to 5 A peak output drive current enables the product to drive devices with nominal currents of up to 300 A. Booster stages are available for gate driver requirements that exceed 5 A, AUXGL and AUXGH output pins drive external N-Channel MOSFETs up to 60 A.
Controller (PWM) signals are compatible with 5 V CMOS logic, which may also be adjusted to 15 V levels by using external resistor divider. The secondary side voltage management provides bipolar gate driver voltage from +15 to -10 V while only a +25 V unipolar voltage is required. The +15 V gate drive voltage is regulated by the chip internal Vee voltage regulator. An undervoltage log out turns off the gate signal and keeps the IGBT or MOSFET in a safe operation.
Specifications
| Max Switching Frequency | 75.00 kHz |
| IGBT Voltage Class | 1200 V |
| Technology | SCALE-iDriver |
| Interface Type | Electrical |
| Number of Channels | 1 |
| Gate Peak Current (Max) | +5 A |
| Product Type | IC |
| Product Sub-Type | Driver IC |
| Supported Module Type |
IGBT
N-Channel MOSFET
|
| Main/Peripheral | N/A |
| Supported Topologies |
2-level Voltage Source
3-level NP-Clamped - Type 1
3-level NP-Clamped - Type 2
Multi-Level NP-Clamped
|
| Protection Features |
Basic Active Clamping
Adv Soft Shutdown
Dynamic Adv Active Clamping
Short Circuit
UVLO(Sec-side)
UVLO(Pri-side)
|
| Driving Mode | Direct-Independent |
| Logic Input Voltage | 5 |
| Supply Voltage (Typ) | 5.00 V |
| Time - Output Rise | 29.00 ns |
| Time - Output Fall | 14.00 ns |
| Isolation Technology | Fluxlink |
| Isolation Type | Reinforced |
| Gate Boosting? | Yes |
| Gate Peak Current (Min) | -5 |
