Capacitor at BYPASS/MULTI-FUNCTION
Posted by: mbaye
on
Hello,
i use the tiny TNY279 in my design.
I need to know if i can use at the BYPASS/MULTI-FUNCTION a (Tantal) capacitor 0.1uf/10V (for standard current limiter) or 10uf/10V (higher current limiter).
I see overall a capacitor 0.1uf/50V (for standard current limiter) or 10uf/50V (higher current limiter). I don't know why 50V.
best regards
コメント
Yes you can use a 10 V rated capacitor at BP/M pin. The voltage at the BP pin is only 6 V.
Can I use 10uF 10V X7R 0805 Ceramic Capacitor @ bypass pin ?
regards