1SP0635 SCALE-2 Plug-and-Play drivers safely and reliably drive 130 x 140 mm and 190 x 140 mm high-voltage and high-power IGBT modules ranging from 1200 V to 3300 V. They are optimised for use in high-reliability applications in the rail industry.
The drivers operate in a master/slave configuraion that allows the safe operation of parallel-connected IGBT modules. The master (1SP0635V or 1SP0635S) can be used as a stand-alone driver without slave to drive a single IGBT module or it can be used with up to three slaves (1SP0635D) to drive up to four parallel-connected IGBT modules.
The master drive is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master by a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter.
1SP0635 drivers are based on Power Integrations' highly-integrated SCALE-2 chipset. Therefore the single-channel drivers are high-performance, complete and extremely compact. The SCALE-2 chipset also reduces the component count by up to 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.
The drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, built-in DC/DC converters, regulated turn-on gate driving voltage and supply-voltage monitoring.
Perfectly-matched drivers are available for all mechanically-compatible IGBT modules. Plug-and-play configuration allows immediate operation after mounting, so the user needs to invest no time and effort in designing or adjusting the driver for a specific application.
Fiber-Optic Interface Options
Fiber-optic links are used to provide electrical insulation for the command and status-feedback signals. Two versions of fiber-optic interfaces are available:
- 1SP0635V, equipped with Versatile links
- 1SP0635S, equipped with ST links
For details, please check the product documentation.
|Max Switching Frequency||7.70 kHz|
|IGBT Voltage Class||3300 V|
|Power - Output/Channel (Max)||3.00 W|
|Temperature - Operating (Min)||-40 ℃|
|Temperature - Operating (Max)||85 ℃|
|Interface Type||Fiber Optic|
|Number of Channels||1|
|Gate Peak Current (Max)||+35 A|
|Product Sub-Type||PnP Driver|
|Supported Module Type||IGBT|
2-level Voltage Source
3-level NP-Clamped - Type 1
3-level NP-Clamped - Type 2
Dynamic Adv Active Clamping
|Connection Type to IGBT||Direct|
|Supply Voltage (Typ)||15.00 V|
|Gate Turn-on Voltage||+15.00 V|
|Gate Turn-off Voltage||--10.10 V|
|Voltage - DC Link Off state (60s)||2700.00 V|
|Time - Output Rise||9.00 ns|
|Time - Output Fall||30.00 ns|
|Temperature - Storage (Min)||-40.00 ℃|
|Temperature - Storage (Max)||50.00 ℃|
|Gate Peak Current (Min)||-35|