Solution Finder Get Tech Support

INN3879C-H801

Off-Line QR Flyback Switcher IC with Integrated USB Type-C and USB-PD Controller, High-Voltage Switch, Synchronous Rectification and FluxLink Feedback

Applications

Product Details

InnoSwitch3-PD dramatically simplifies the development and manufacturing of USB-PD power supplies by integrating primary switch and controller, isolated feedback, secondary control and USB-PD controller into a single package.

The architecture incorporates a novel inductive coupling feedback scheme, Fluxlink, to provide a safe, reliable, and low-cost means to communicate accurate direct sensing of the output voltage and current. The primary controller on InnoSwitch3-PD is a quasi-resonant (QR) flyback controller that has the ability to operate in continuous conduction mode (CCM), using both variable frequency and variable current control schemes. The InnoSwitch3-PD secondary controller consists of a transmitter circuit that is magnetically coupled to the primary receiver, an I2C interface to control power supply parameters and telemetry functions, a 4.4 V regulator, SR FET driver, QR mode circuit, oscillator and timing functions, and a host of integrated protection features.

Product Highlights 

  • USB Type C and PD Controller
  • USB Power Delivery 3.0 + PPS provider and QC4 support
  • Compliant with USB Type-C Rev. 1.3
  • Integrated VCONN FETs with soft start and over-current protection
  • Supports electronically marked cables
  • Configurable pull-up resistor Rp
  • On chip temperature sensor
  • Telemetry for power supply status and fault monitoring
  • PowiGaN technology – up to 100 W without heat sinks
  • Dedicated NTC pin for temperature sense 

Highly Integrated, Compact Footprint

  • Multi-mode Quasi-Resonant (QR) / DCM / CCM flyback controller, high-voltage switch, secondary-side sensing and synchronous rectifier driver
  • Optimized efficiency across line and load range
  • Integrated FluxLink, HIPOT-isolated, feedback link
  • Instantaneous transient response
  • Drives low-cost N-channel FET series load switch

EcoSmart – Energy Efficient

  • No-load consumption as low as 14 mW
  • Enables power supply designs that easily comply with all global energy efficiency regulations
  • Low heat dissipation

Advanced Protection / Safety Features

  • Input voltage monitoring with accurate brown-in/brown-out and overvoltage protection
  • Output OV/UV fault detection with independently configured responses
  • Open SR FET gate detection
  • Hysteretic thermal shutdown
  • Programmable watchdog timer for system faults
  • Integrated high voltage FETs for VBUS short protection on CC1, CC2

Full Safety and Regulatory Compliance

  • Reinforced insulation
  • Isolation voltage >4000 VAC
  • 100% production HIPOT compliance testing
  • UL1577 isolation voltage 4000 VAC (max) and TUV (EN62368) safety approved

Green Package

  • Halogen free and RoHS compliant

Specifications

Specifications
Output Power (Max) - Open Frame, 230V 60.00 W
Output Power (Max) - Enclosed, 230V 60.00 W
Output Power (Max) - Enclosed, Univ 60.00 W
Output Power (Max) - Open Frame, Univ 60.00 W
Switching Frequency (min) 25.00 kHz
Switching Frequency (max) 95 kHz
Breakdown Voltage 750 V
Voltage - Output (Min) 3.00 V
Voltage - Output (Max) 24.00 V
Voltage - Input (Min) 85 V
Voltage - Input (Max) 265 V
Auto-Restart & Overvoltage Response
Auto-restart
Latch Off
Cable Drop Compensation X
IC Package InSOP-24D
Internal Switch Yes
Over-Temperature Response Hysteretic
PowiGaN? Yes
Temperature - Operating (Min) -40 °C
Temperature - Operating (Max) 150 °C
Control Scheme Fluxlink
Protection Features
Input Overvoltage
Input Undervoltage
Open SR FET Detection
Output Overload
Output Overvoltage
Output Short Circuit
Overtemperature
Output Profile CV/CC
Topology Flyback
PDOs & APDOs
5V/3A
9V/3A
15V/3A
20V/3A
3.3-21V/3A
Product Sub-Type PMIC
MSL Rating 3
Secondary Response
Auto-restart
Latch Off