CAPZero-4
Zero Loss Automatic X Capacitor Rapid Discharge IC
アプリケーション
|
製品
|
RDK利用可能
|
データ シート
|
最大X静電容量
|
総直列抵抗
|
絶縁破壊電圧
|
ICパッケージ
|
取付タイプ
|
製品タイプ
|
動作温度 - 最大
|
動作温度 - 最小
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|
|
RDK Available
|
Data Sheet
View Data Sheet
|
Max X Capacitance
101 nF to 6 microF
|
Total Series Resistance
50 kOhm (min) / 100 kOhm (max)
|
Breakdown Voltage
900 V
|
IC Package
SO-8
|
Mounting Type
表面実装
|
Product Type
IC
|
Temperature - Operating (Max)
125 °C
|
Temperature - Operating (Min)
-40 °C
|
|
製品詳細
When AC voltage is applied, CAP400DG blocks current flow in the X capacitor safety discharge resistors, reducing the power loss to less than 1 mW, or essentially zero¹ at 230 VAC. When AC voltage is disconnected, CAP400DG automatically discharges the X capacitor by connecting the series discharge resistors. This operation allows total flexibility in the choice of the X capacitor to optimize differential mode EMI filtering and reduce inductor costs, with no change in power consumption.
Designing with CAP400DG is simply a matter of selecting the appropriate external resistor values for the X capacitor value being used to achieve the necessary time constant. The simplicity and ruggedness of the two terminal CAP400DG IC makes it an ideal choice in systems designed to meet ErP Lot 6 requirements.
Key Features
- Provides lossless ZC (Zero Crossing) signal to system MCU
- Meets IEC 60335 X capacitor discharge of <34 V in <1 sec
- One part to cover X capacitor values from 100 nF to 6 mF
- Blocks current through X capacitor discharge resistors when AC voltage is connected
- Automatically discharges X capacitors through discharge resistors when AC is disconnected
- Simplifies EMI filter design – larger X capacitor allows smaller inductive components with no change in consumption
- Only two terminals – meets safety standards for use before or after system input fuse
- >4 mm creepage on package and PCB
- Self supplied – no external bias required
- High common mode surge immunity – no external ground connection
- High differential surge withstand – 900 V internal MOSFETs
- NEMKO and CB certified
- <1 mW power consumption
- Wide operating temperature of -40 to 125°C
