解决方案搜寻 技术支持

2SC0535T

用于3.3 kV IGBT的双通道SCALE-2驱动核,最高的集成水平,超紧凑,高电压,高功率,35 A门极电流,2 x 5 W输出功率

筛选器 筛选产品
隐藏筛选器
Filter Products
显示1 - 4项产品, 共4项
Product Parts
产品
数据手册
IGBT电压等级
通道数
三防漆?
支持的模块
逻辑输入电压
保护功能
技术
接口类型
支持的拓扑
电源电压 (典型)
门极导通电压
门极关断电压
输出功率/通道-最大
门极峰值电流(最大)
隔离类型
隔离技术
最大开关频率
時間 - 輸出下降
時間 - 輸出上升
驱动模式
主/外围
Options Info
并行支持?
IGBT Voltage Class 3300 V
Number of Channels 2
Conformal Coated? No
Supported Module Type IGBT
Logic Input Voltage 5
Protection Features Adv Active Clamping, Short Circuit, UVLO(Sec-side), UVLO(Pri-side)
Technology SCALE-2
Interface Type Electrical
Supported Topologies 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Supply Voltage (Typ) 15 V
Gate Turn-on Voltage +15.0 V
Gate Turn-off Voltage --10.8 V
Power - Output/Channel (Max) 7.5 W
Gate Peak Current (Max) +35 A
Isolation Type Reinforced
Isolation Technology Galvanic
Max Switching Frequency 100.0 kHz
Time - Output Fall 25 ns
Time - Output Rise 20 ns
Driving Mode Halfbridge, Direct-Independent
Main/Peripheral N/A
IGBT Voltage Class 3300 V
Number of Channels 2
Conformal Coated? Yes
Supported Module Type IGBT
Logic Input Voltage 5
Protection Features Adv Active Clamping, Short Circuit, UVLO(Sec-side), UVLO(Pri-side)
Technology SCALE-2
Interface Type Electrical
Supported Topologies 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Supply Voltage (Typ) 15 V
Gate Turn-on Voltage +15.0 V
Gate Turn-off Voltage -10.8 V
Power - Output/Channel (Max) 7.5 W
Gate Peak Current (Max) +35 A
Isolation Type Reinforced
Isolation Technology Galvanic
Max Switching Frequency 100.0 kHz
Time - Output Fall 25 ns
Time - Output Rise 20 ns
Driving Mode Halfbridge, Direct-Independent
Main/Peripheral N/A
Paralleling Support? No
IGBT Voltage Class 3300 V
Number of Channels 2
Conformal Coated? No
Supported Module Type IGBT
Logic Input Voltage 5
Protection Features Adv Active Clamping, Short Circuit, UVLO(Sec-side), UVLO(Pri-side)
Technology SCALE-2
Interface Type Electrical
Supported Topologies 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Supply Voltage (Typ) 15 V
Gate Turn-on Voltage +15.0 V
Gate Turn-off Voltage --10.8 V
Power - Output/Channel (Max) 7.5 W
Gate Peak Current (Max) +35 A
Isolation Type Reinforced
Isolation Technology Galvanic
Max Switching Frequency 100.0 kHz
Time - Output Fall 25 ns
Time - Output Rise 20 ns
Driving Mode Halfbridge, Direct-Independent
Main/Peripheral N/A
Options Info Conformal Coated Version  2SC0535T2G0C-33
Paralleling Support? No
IGBT Voltage Class 3300 V
Number of Channels 2
Conformal Coated? Yes
Supported Module Type IGBT
Logic Input Voltage 5
Protection Features Adv Active Clamping, Short Circuit, UVLO(Sec-side), UVLO(Pri-side)
Technology SCALE-2
Interface Type Electrical
Supported Topologies 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Supply Voltage (Typ) 15 V
Gate Turn-on Voltage +15.0 V
Gate Turn-off Voltage --10.8 V
Power - Output/Channel (Max) 7.5 W
Gate Peak Current (Max) +35 A
Isolation Type Reinforced
Isolation Technology Galvanic
Max Switching Frequency 100.0 kHz
Time - Output Fall 25 ns
Time - Output Rise 20 ns
Driving Mode Halfbridge, Direct-Independent
Main/Peripheral N/A
Paralleling Support? No

产品详情

2SC0535T2Ax-33 SCALE-2双通道驱动核集低成本、超紧凑于一身,而且有广泛的应用范围。该驱动器专门为要求高可靠性的工业和牵引应用领域而设计,能够驱动3300 V以下的所有常见高压IGBT模块。这款驱动器支持多个驱动器直接并联,使其能够很容易地实现大功率的逆变器设计,并可支持使用1700V IGBT的多电平拓扑应用。

技术优势

2SC0535T是目前工业应用中该电压和功率范围内最紧凑的驱动核,尺寸仅有76.5 x 59.2 mm,高度为26 mm。与传统解决方案相比,SCALE-2芯片组可将元件数量减少多达80%,因此能够显著地提高可靠性,并降低成本。

2SC0535T具备了双通道驱动核所必需的所有元件及功能,例如短路保护、高级有源箝位、隔离的DC/DC电源以及电源电压监控功能。驱动器的原方与副方隔离,两个输出通道之间也隔离。

每个输出通道都可以提供35 A的输出电流和5 W的驱动功率,使2SC0535T适合驱动大功率模块和并联的IGBT模块。在IGBT模式下,驱动器可产生+15 V / –10V的门极电压摆幅。对开通电压进行稳压,无论输出功率如何都使其保持在稳定的+15 V。此外,温度范围也变得更宽,可适用于温度低至-55 °C的应用。

EMC性能优异,即使在要求严苛的工业条件下也能安全可靠地运行。2SC0535T驱动器的爬电距离为44 mm,适合耐压高达3.3 kV的高压IGBT。该驱动器符合UL标准,其电气间隙和爬电距离满足EN-50178和EN-50124中污染等级2和过电压类别2的要求。因此,该驱动器是所有牵引和工业应用的绝佳选择。变压器通过100%测试,无局部放电现象,确保其在预计寿命内安全运行。

 驱动并联的IGBT

带有独立驱动器的IGBT模块可实现任意数量的直接并联。驱动器直接并联是一种崭新的、开创性的概念,这使得IGBT并联的技术门槛大大降低,客户无需花太多时间对均流性进行调试。

直接并联:工作原理

The 2SC0535T is the most compact driver core in its voltage and power range - a cost-effective and compact dual-channel solution for various 3.3kV applications.

  • Blocking voltages up to 3300V
  • 2-level and multilevel topologies
  • Embedded paralleling capability
  • Switching frequency up to 100kHz
  • Very short delay time of <100ns
  • Small jitter of ±2ns
  • Gate current ±35A
  • +15V (regulated)/-10V gate driving
  • Interface for 3.3V...15V logic level
  • Direct and half-bridge modes
  • IGBT short-circuit protection
  • Supply under-voltage lockout
  • Isolated DC/DC converter
  • 2 x 5W output power
  • Operating temperature -40…85°C
  • Safe isolation to EN50178 and EN50124
  • UL compliant
  • Superior EMC
  • Reliable, long service life