솔루션 찾기

2SC0106T

Dual-channel SCALE-2+ driver core, highest integration level for inverter designs from 37 to 110 kVA, integrated short-circuit soft shutdown function

애플리케이션
필터 제품 숨기기
1 - 2 개 제품 총 2 개 전시
Product Parts
제품
데이터 시트
IGBT 전압 등급
채널 수
등각 코팅?
지원되는 모듈 유형
보호 기능
기술
지원되는 토폴로지
인터페이스 유형
공급 전압 (일반)
게이트 턴온 전압
게이트 턴 오프 전압
출력 전력 / 채널-최대
게이트 피크 전류 (최대)
격리 유형
격리 기술
최대 스위칭 주파수
시간 - 출력 하락
시간 - 출력 상승
UL 준수
드라이브 모드
메인 / 주변
Options Info
병렬 지원?
ROMS
Data Sheet PDF 보기
IGBT Voltage Class 1200 V
Number of Channels 2
Conformal Coated? No
Supported Module Type IGBT, N-Channel MOSFET
Protection Features Basic Active Clamping, Soft Shutdown, Short Circuit, UVLO(Sec-side), UVLO(Pri-side)
Technology SCALE-2+
Supported Topologies 2-level Voltage Source
Interface Type Electrical
Supply Voltage (Typ) 15 V
Gate Turn-on Voltage +15.0 V
Gate Turn-off Voltage --10.2 V
Power - Output/Channel (Max) 1.2 W
Gate Peak Current (Max) +6 A
Isolation Type Reinforced
Isolation Technology Galvanic
Max Switching Frequency 50.0 kHz
Time - Output Fall 13 ns
Time - Output Rise 20 ns
UL Compliant recognized
Driving Mode Direct-Independent
Main/Peripheral N/A
Options Info Conformal Coated Version  2SC0106T2A1C-12
ROMS Yes
Data Sheet PDF 보기
IGBT Voltage Class 1200 V
Number of Channels 2
Conformal Coated? Yes
Supported Module Type IGBT, N-Channel MOSFET
Protection Features Basic Active Clamping, Soft Shutdown, Short Circuit, UVLO(Sec-side), UVLO(Pri-side)
Technology SCALE-2+
Supported Topologies 2-level Voltage Source
Interface Type Electrical
Supply Voltage (Typ) 15 V
Gate Turn-on Voltage +15.0 V
Gate Turn-off Voltage --10.2 V
Power - Output/Channel (Max) 1.2 W
Gate Peak Current (Max) +6 A
Isolation Type Reinforced
Isolation Technology Galvanic
Max Switching Frequency 50.0 kHz
Time - Output Fall 13 ns
Time - Output Rise 20 ns
Driving Mode Direct-Independent
Main/Peripheral N/A
Paralleling Support? No

The dual-channel gate driver core 2SC0106T, equipped with the new SCALE™-2+ chipset, is a high-performance two-channel IGBT/MOSFET gate driver core for 1200 V IGBTs in the 37 kW to 110 kW power range. The 2SC0106T drives 600 V to 1200 V IGBTs with collector currents up to 450 A and switches at frequencies up to 50 kHz.

The new SCALE™-2+ technology enables soft shutdown (SSD) to be implemented in the event of a short circuit without requiring additional components. This is particularly beneficial in applications with low stray-inductance where full Advanced Active Clamping – a method invented by CONCEPT for shutting down IGBTs or MOSFETs in a controlled manner under any circumstances - may not be necessary.

UL-recognized under E321757 for UL508C and E346491 for UL60950-1 is planned.

Cost effective high-performance alternative to opto-coupler based solution with safe isolation and no parameter degradation. This product is available with Conformal Coating.

  • SCALE™-2+ chip set
  • This product is available with Conformal Coating
  • New Pin length for 2mm PCB's (2.54mm; 3.1mm; 5.84mm)
  • New pins for hand-, wave-and selective soldering processes
  • All lead free
  • All with EMC improved technology
  • 100% downward compatible
  • Dual-channel driver core for up to 1200 V
  • ±6A gate current, +15 V/-8 V
  • 1 W @ 85°C per channel
  • On-board power supply
  • High reliability (reduced component count)First-class isolation technology
  • Partial-discharge-tested isolation technology
  • Delay time <100 ns, up to 50 kHz
  • Isolation coordination according to IEC 61800-5-1 and IEC 60664-1
  • UL Recognized Component
  • -20°C to +85°C (105°C with derating)
  • RoHS compliant
  • New pins for hand-, wave-and selective soldering processes
  • No change in electrical and mechanical performance
  • Available with Conformal Coating