Entering Toroid Core Data into PI expert component library
Hi, I want to use a Kool Mu Toroid core for a flyback design in PI expert. This is a bobbin-less flyback transformer design using a Toroid core which will be wound manually by hand. There are a few Bobbin data fields in the component library that i am not sure of what to enter in for data, such as:
1) Bobbin fit window
2) Winding width of bobbin
3) Bobbin area
I attached the spec for the Toroid Core that I want to enter into the Core library, it is a Kool Mu 60u 46.7 O.D. Toroid #77439.
I am not a magnetics design expert so am not completely familiar w/ these bobbin terms and how to equate the data from the Toroid spec. Can you help with some info on this issue? I appreciate...
thanks alot,
P.N. Bakalos
Senior Electrical Engineer
Bose Corporation,
Framingham, Ma. 01701
(508) 766-4247
perry_bakalos@bose.com
댓글
there is no easy way of entering this information into the atabase. Toroids typically have distributed air gaps which is different from Ferrite cores which need a discrete air gap. The software is just not setup to accept these cores at the moment.
there is no easy way of entering this information into the atabase. Toroids typically have distributed air gaps whihc is different from Ferrite cores which need a discrete air gap. The software is just not setup to accept these cores at the moment.