PI Expert 디자인 소프트웨어

PI Expert Online은 사양을 읽어와 전력 변환 솔루션을 자동으로 생성하는 웹 기반 프로그램입니다.

• 신제품이 사용 가능할 시에 추가됩니다.
• 소프트웨어 업데이트 및 새로운 기능이 자동으로 추가됩니다.
• 다운로드나 설치가 필요하지 않습니다.

PI Expert Online은 사용 가능한 프로토타입을 구축하고 테스트하는 데 필요한 모든 것을 제공합니다.

• 종합적인 트랜스포머 구성 보고서 – "바로 구축 가능한(ready-to-build)" 솔루션
• 전기적, 기계적 구성도
• 권선 지침
• BOM (Bills of materials)
• 보드 레이아웃 권장 사항

PI Expert Online처럼, PI의 기존 파워 서플라이 설계 도구인 PI Expert Suite는 사용 가능한 프로토타입을 구축하고 테스트하는 데 필요한 모든 정보를 제공합니다.

• 인터넷 연결이 필요하지 않습니다.
• 정기적으로 업데이트됩니다.

상세 내용

• PI Expert FAQs
• Watch this 3-part webinar about PI Expert Online: Pt 1: Introduction to PI Expert Online
  
  

New in version 2.4.3

• TinySwitch-3/4 optimization issue resolution
• General Tiny-like PI Device optimization update
• USB-PD GUI logic update
• Zener Diode Database update
• PI Xls Spreadsheets update to TinySwitch-III, TinySwitch-4, TopSwitch-JX, HiperPFS-2

New in version 2.4.2

• USB PD GUI - changes /modifications.
• Updates to algorithm for current sensing circuit component selection
• Change of preferences for SR MOSFET and VBUS Switch components
• Simplification of winding layer adjustment algorithm for optimal transformer design
• Updated several PI Xls spreadsheets

New in version 2.4

• Updated transformer design engine for InnoSwitch3-CE/CP/EP/Pro offers flexibility in creating custom winding construction and shield windings
• Features to enable design report creation including change log
• Improved Optimization. User adjustable parameter ranges and optimization priority between cost, efficiency, core volume and thermal performance
• Update to PI xls format. Allows hiding section of spreadsheet for easy viewing
• PI Expert designs for all product families now prefer surface mount components by default
• Updates to legacy transformer designs for additional clearance/creepage considerations
• InnoSwitch3 Designs now supports up to 24.5V in PI Expert

New in version 2.3.5

• LYTSwitch-6 update with new part numbers (feature codes)
• Added ability to allow second (parallel) SR-FET on the output
• Transformer construction now supports Parallel Wound Secondary
• PI xls Design now supports Litz Wire in Transformer Construction
• PI Device database update with additional part numbers (feature codes) and current limit dependency
• Update to InnoSwitch-3 bias calculations
• Update to high output voltage design rules for InnoSwitch3
  - Update to guidance for using VOUT-Pin Linear Regulator
• PI xls Spreadsheets update to InnoSwitch3-CE, InnoSwitch3-CP, InnoSwitch3-EP, InnoSwitch3-Pro, 900 V InnoSwitch3-EP and InnoSwitch3-AQ

New in version 2.3.4

• PI Expert now supports Litz Wires
• DC-DC LYTSwitch-6 now supports Design Evaluation in PI Expert
• Calculation Engine updates
• For InnoSwitch-3 Flyback spreadsheets,
  - Interactive Design Evaluation feature for InnoSwitch3-CE/EP/CP/Pro and spreadsheets
  - Updates to InnoSwitch3-EP/CP/Pro with Size 8 GaN devices
• Minor updates to TOPSwitch-JX Flyback spreadsheet

New in version 2.3.3

• PI Expert now supports CAPZero-3
• PI Expert Online new Look and Feel Phase 1 - Quick links to product documents and new design for components selection
• New performance-optimizing bias winding circuit calculations for InnoSwitch3 Family
• Minor updates to InnoMux and InnoSwitch3-MX spreadsheet

New in version 2.3

• PI Expert now supports DC Input for LYTSwitch-6 product family
• New features in PI Expert Online
  • Enables freezing of components prior to optimization
  • Component Database now includes new Surface Mount parts
  • InnoSwitch3-CP and InnoSwitch3-Pro have a new bias winding circuit calculation for optimizing design performance
  • For all InnoSwitch-3 family devices:
     - Interactive Design Evaluation Report
     - Updated Clamp calculations
• PI xls now supports LinkSwitchTN2-900V Buck Boost
• Improvements in PI Expert Online performance and stability

New in version 2.2.10

• Updates to InnoSwitch-CH/CE/EP/EP 900V Flyback spreadsheets
• Updates to LYTSwitch-6 Flyback and Switched Valley-Fill PFC with Flyback spreadsheets

New in version 2.2.9

• Updates to InnoMux and InnoSwitch3-MX spreadsheet
• Bug fixes

New in version 2.2.8

• New features in PI Expert Online:
  • InnoSwitch-3 EP/CP/Pro now include additional parts with breakdown voltage of 750 V
  • CAPZero support
  • Calculation and Optimization Engine update for InnoSwitch3 families
  • Magnet wire database update
• PI xls now supports InnoMux and InnoSwitch3-MX Chipset
• Minor updates to InnoSwitch-CP Flyback spreadsheet
• Bug fixes

New in version 2.2.7.14

• Updates to PI xls InnoSwitch-3 EP/CP/Pro Flyback spreadsheets – Additional parts with breakdown voltage of 750V added to the spreadsheets

New in version 2.2.7

• Updates to PI xls LYTSwitch-6
• Major updates to Transformer Engine for all families – Support uneven primary winding split and other enhancements which provides superior transformer optimization
• PI xls now supports InnoSwitch3-EP 900V Flyback and LinkSwitchTN2-900V Buck spreadsheets
• Major update to HiperPFS-4 Boost spreadsheet
• Bug fixes

New in version 2.2.6

• Minor updates to LinkSwitch-TN2 in Buck Boost topology
• Transformer Engine now supports Flying Leads
• Bug fixes

New in version 2.2.5

• Minor updates to InnoSwitch3-EP Flyback spreadsheet
• Minor updates to HiperTFS-2 spreadsheet
• Enable Exhaustive Search Optimization method for InnoSwitch3-CP and InnoSwitch3-Pro
• Enhancements in PI Expert Online: added more High Voltage Ceramic capacitors to Component Database; improved Post Filter Circuit components selection; and updated new Design Notifications
• Bug fixes

New in version 2.2.4

• PI xls now supports TinySwitch-LT in Flyback topology
• Minor updates to LinkSwitch-HP Flyback spreadsheet
• Added Current Sense Circuit Slope components to InnoSwitch3-Pro

New in version 2.2

• PI Expert now supports InnoSwitch3-CP/PRO
• Improvements in PI Expert Online performance and stability

 

자세한 내용은 영상을 통해 확인 해 보세요!

 

설계 소프트웨어 지원 개요

PI 제품을 위한 설계 소프트웨어 지원	PI Expert	PI xls
BridgeSwitch		X19
DPA-Switch	X1	X2
HiperLCS		X5
HiperPFS		X6
HiperPFS-2		X6
HiperPFS-3		X6
HiperPFS-4		X6
HiperTFS-2		X7
InnoSwitch4-CZ		X1
InnoSwitch3-CE	X1	X1
InnoSwitch3-CP	X1	X1
InnoSwitch3-EP	X1	X1
InnoSwitch3-Pro	X1	X1
InnoSwitch3-EP 900 V		X1
InnoSwitch3-AQ		X1
InnoSwitch3-MX & InnoMux		X1
InnoSwitch-CE		X1
InnoSwitch-CH		X1
InnoSwitch-CP		X1
InnoSwitch-EP		X1
InnoSwitch-EP 900 V		X1
LinkSwitch-II		X3
LinkSwitch-3		X1
LinkSwitch-4		X1
LinkSwitch-CV	X1	X3
LinkSwitch-HP	X1	X1
LinkSwitch-LP		X1
LinkSwitch-PH	X1	X8
LinkSwitch-PL	X1	X15
LinkSwitch-TN		X4
LinkSwitch-TN2		X10
LinkSwitch-TNZ		X4
LinkSwitch-XT	X1	X1
LinkSwitch-XT2		X1
LinkZero-AX		X1
LinkZero-LP		X1
LYTSwitch-0		X12
LYTSwitch-1		X16
LYTSwitch-2		X1
LYTSwitch-3		X10
LYTSwitch-4		X13
LYTSwitch-5		X14
LYTSwitch-6	X1	X18
LYTSwitch-7		X12
TinySwitch-III	X1	X1
TinySwitch-4	X1	X1
TinySwitch-LT		X1
TOPSwitch-GX		X1
TOPSwitch-HX	X1	X1
TOPSwitch-JX	X1	X1

참고:

1. 플라이백 토폴로지에서만 지원됩니다
2. 플라이백과 포워드 토폴로지에서 모두 지원됩니다
3. 플라이백과 탭-벅 토폴로지에서 모두 지원됩니다
4. 플라이백, 벅, 벅-부스트 토폴로지에서 지원됩니다
5. LLC 공진형 토폴로지에서 지원됩니다
6. 부스트 토폴로지에서 지원됩니다
7. 두 개의 스위치 포워드 토폴로지에서 지원됩니다
8. 플라이백 및 벅 토폴로지에서 지원됩니다
9. 플라이백, 탭 벅, 벅 및 벅-부스트 토폴로지에서 지원됩니다
10. 플라이백, 벅, 벅-부스트, 탭 벅 부스트 토폴로지에서 지원됨
11. 플라이백과 탭 벅 토폴로지에서 모두 지원됨
12. 벅 토폴로지에서 지원됩니다
13. 플라이백, 벅, 벅-부스트, 탭-벅 토폴로지에서 지원됨
14. 플라이백, 벅, 부스트, 벅-부스트, 탭-벅 부스트 토폴로지에서 지원됨
15. 플라이백, 벅, 부스트, 벅-부스트, 탭-벅 토폴로지에서 지원됨
16. 벅, 벅-부스트 토폴로지에서 지원됨
17. 밸리 필 PFC 방식으로 스위칭하는 플라이백 토폴로지에서 지원됨
18. 플라이백, 밸리 필 PFC 방식으로 스위칭하는 플라이백 토폴로지에서 지원됨
19. 3상 브리지 토폴로지 지원됩니다