Application Notes

This document provides design guidelines for configuring power limits in InnoMux-2 applications, covering the relationship
between switching frequency, load conditions, and individual power limit settings.

Please refer to the InnoSwitch5-Pro data sheet for the pin assignments.

This application note provides design guidelines and key considerations for using the InnoMux™-2 product family.

This application note is intended for engineers designing an isolated AC-DC flyback power supply or charger using the TinySwitch-5 family of devices.

The flyback controller IC used is InnoMux2-BL IMX2065C, and the four-channel LED backlight controller IC is IML204DG. The device was tested under room temperature during 90 VAC and 265 VAC line voltages and, standby and nominal load.

The flyback controller IC used is InnoMux2-BL IMX2065C, and the four-channel LED backlight controller IC is IML204DG. The device was tested under room temperature during 90 VAC and 265 VAC line voltages and, standby and nominal load.

This manual describes the software implementation including driver libraries used to control InnoSwitch4-Pro operations. Important aspects of this document are calculations for the values to be programmed for various configurations such as voltage, current, cable drop compensation, constant power, I²C command sequences to prevent any unexpected behaviors, device responses and code examples.

This document discusses the application of Peripheral Interface Controller (PIC) library for the InnoSwitch4-Pro IC family. This library can be used with both the InnoSwitch3-Pro and InnoSwitch4-Pro family of devices. This code was designed to be highly portable with different microcontroller platforms.

The application of InnoSwitch3-Pro and InnoSwitch4-Pro Family Arduino Library is discussed in this document. This code was designed to be highly portable with different microcontroller platforms.

This guide will allow the user to get sufficient knowledge on how to operate the devices with the use of a simple microcontroller such as Arduino. The microcontroller used is an Arduino Mega 2560 to satisfy the memory requirement of the master debugger file.

This manual is describes what constitutes the TST-047 toggle board, how it works and how to use it with InnoSwitch4-Pro family of offline switcher IC devices. It also contains the schematic, bill of materials, printed circuit board layout.

This application note is intended for engineers designing an isolated AC-DC flyback power supply using TinySwitch-4 family of devices. It provides guidelines to enable an engineer to quickly select key components and also to complete a suitable transformer design.

This application note provides information for designing a non-isolated power supply using the LinkSwitch-TNZ family of devices. This document describes the design procedure for buck and buck-boost converters.

This application note is intended to assist in designing an isolated AC-DC flyback power supply or charger using the InnoSwitch3-PD device. It provides guidelines for selecting key components and the information necessary to complete a suitable transformer design.

This application note is intended as a design guide for engineers designing an isolated AC-DC single-stage flyback power supply using the MinE-CAP family of devices. It is assumed that the designer is using the MinE-CAP together with the InnoSwitch3 family of power conversion ICs. However, the design equations shown can be used for applications beyond the scope of this document.

This application note (AN) provides guidance for using LinkSwitch-XT2 and should be read in conjunction with and in the context of the LinkSwitch-XT2 family data sheet.

This application note (AN) provides guidance for using TinySwitch-LT and should be read in conjunction with and in the context of the TinySwitch-LT family data sheet.

Provides guidance to developers on how to use an evaluation board (TST-047) to test and debug InnoSwitch3-Pro based power supplies.

This application note describes the use of a tool made using an Arduino-UNO and an LCD Display shield which enabled evaluation of the power stage made using InnoSwitch3-Pro.