解决方案查找器

2SP0320T2D0-12

Dual-Channel SCALE-2 Plug-and-Play Driver for Primepack™ IGBT Modules, Electrical or Fiber-Optic Interface, Embedded Paralleling Capability

產品規格型錄
下載 PDF 檢視 PDF
產品詳情

2SP0320 is specifically targeted at PrimePACK™ IGBT modules. As a member of the SCALE-2 plug-and-play driver family, it satisfies industry’s requirements for optimized electrical performance and noise immunity. 

The highly integrated SCALE-2 chipset reduces component count by 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.
The use of SCALE-2 technology also means that 2SP0320 devices are complete two-channel IGBT drivers equipped with DC/DC converters, short-circuit protection, Advanced Active Clamping and supply-voltage monitoring. 

Users need only solder them onto the corresponding IGBT module. The system can then be put into immediate operation with no further development or matching engineering effort. This enables short design cycles to be realized without compromising overall system efficiency. 

The embedded paralleling capability allows simple inverter design for higher power ratings.
Specifically adapted drivers are available for all IGBT module types. All drivers are available with electrical and fiber-optic interfaces. 

Interface Options

The 2SP0320 driver series is available with one electrical and various fiber-optic interfaces. 

Electrical Interface: 2SP0320T
The DIC20 electrical interface is very simple and easy to use.The driver has the following terminals:

  • Power supply and GND terminals
  • 2 x drive signal inputs
  • 2 x status outputs (failure returns)
  • 1 x mode selection (half-bridge mode / direct mode)
  • 1 x input to set the blocking time

All inputs are ESD-protected and all digital inputs have Schmitt-trigger characteristics. 

Fiber-Optic Interfaces: 2SP0320V and 2SP0320S
Fiber-optic links are used for the electrical insulation of the command and status-feedback signals. Two versions are available:

  • 2SP0320V equipped with Versatile links
  • 2SP0320S equipped with ST links 

For details, check the product documentation.

Driving Parallel-Connected IGBTs

The driver allows direct parallel connection of any number of PrimePACK modules with individual drivers. This new, pioneering concept makes it practical for the first time to build a converter series with discrete modules as well as parallel-connected IGBTs without any additional development effort.

產品規格
IGBT Voltage Class 1200 V
Technology SCALE-2
Power - Output/Channel (Max) 3.00 W
Interface Type Electrical
Number of Channels 2
Gate Peak Current (Max) +20 A
Product Type Board
Product Sub-Type PnP Driver
Supported Module Type IGBT
Main/Peripheral N/A
Supported Topologies 2-level Voltage Source 3-level NP-Clamped - Type 1 3-level NP-Clamped - Type 2 Multi-Level NP-Clamped
Protection Features Adv Active Clamping Over-voltage Short Circuit UVLO(Sec-side) UVLO(Pri-side)
Driving Mode Halfbridge Direct-Independent
Connection Type to IGBT Direct
Logic Input Voltage 5
Supply Voltage (Typ) 15.00 V
Gate Turn-on Voltage +15.00 V
Gate Turn-off Voltage --10.40 V
Time - Output Rise 7.00 ns
Time - Output Fall 25.00 ns
Isolation Technology Galvanic
Isolation Type Reinforced
Gate Peak Current (Min) -20
產品規格

資源