解决方案查找器

2SC0106T

Dual-channel SCALE-2+ driver core, highest integration level for inverter designs from 37 to 110 kVA, integrated short-circuit soft shutdown function

過濾器 Filter Products
顯示1 - 2項產品, 共2項
Product Parts
產品
產品規格型錄
IGBT電壓等級
通道數
保形塗層?
支持的模組種類
保護功能
技術
支持的拓撲
接口類型
電源電壓 (典型)
柵極導通電壓
柵極關斷電壓
輸出功率/通道 - 最大
柵極峰值電流 (最大)
隔離類型
隔離技術
最大開關頻率
時間 - 輸出下降
時間 - 輸出上升
符合UL
驅動模式
主/外圍
Options Info
並行支持?
ROMS
Data Sheet 檢視 PDF
IGBT Voltage Class 1200 V
Number of Channels 2
Conformal Coated? No
Supported Module Type IGBT, N-Channel MOSFET
Protection Features Basic Active Clamping, Soft Shutdown, Short Circuit, UVLO(Sec-side), UVLO(Pri-side)
Technology SCALE-2+
Supported Topologies 2-level Voltage Source
Interface Type Electrical
Supply Voltage (Typ) 15 V
Gate Turn-on Voltage +15.0 V
Gate Turn-off Voltage --10.2 V
Power - Output/Channel (Max) 1.2 W
Gate Peak Current (Max) +6 A
Isolation Type Reinforced
Isolation Technology Galvanic
Max Switching Frequency 50.0 kHz
Time - Output Fall 13 ns
Time - Output Rise 20 ns
UL Compliant recognized
Driving Mode Direct-Independent
Main/Peripheral N/A
Options Info Conformal Coated Version  2SC0106T2A1C-12
ROMS Yes
Data Sheet 檢視 PDF
IGBT Voltage Class 1200 V
Number of Channels 2
Conformal Coated? Yes
Supported Module Type IGBT, N-Channel MOSFET
Protection Features Basic Active Clamping, Soft Shutdown, Short Circuit, UVLO(Sec-side), UVLO(Pri-side)
Technology SCALE-2+
Supported Topologies 2-level Voltage Source
Interface Type Electrical
Supply Voltage (Typ) 15 V
Gate Turn-on Voltage +15.0 V
Gate Turn-off Voltage --10.2 V
Power - Output/Channel (Max) 1.2 W
Gate Peak Current (Max) +6 A
Isolation Type Reinforced
Isolation Technology Galvanic
Max Switching Frequency 50.0 kHz
Time - Output Fall 13 ns
Time - Output Rise 20 ns
Driving Mode Direct-Independent
Main/Peripheral N/A
Paralleling Support? No

The dual-channel gate driver core 2SC0106T, equipped with the new SCALE™-2+ chipset, is a high-performance two-channel IGBT/MOSFET gate driver core for 1200 V IGBTs in the 37 kW to 110 kW power range. The 2SC0106T drives 600 V to 1200 V IGBTs with collector currents up to 450 A and switches at frequencies up to 50 kHz.

The new SCALE™-2+ technology enables soft shutdown (SSD) to be implemented in the event of a short circuit without requiring additional components. This is particularly beneficial in applications with low stray-inductance where full Advanced Active Clamping – a method invented by CONCEPT for shutting down IGBTs or MOSFETs in a controlled manner under any circumstances - may not be necessary.

UL-recognized under E321757 for UL508C and E346491 for UL60950-1 is planned.

Cost effective high-performance alternative to opto-coupler based solution with safe isolation and no parameter degradation. This product is available with Conformal Coating.

  • SCALE™-2+ chip set
  • This product is available with Conformal Coating
  • New Pin length for 2mm PCB's (2.54mm; 3.1mm; 5.84mm)
  • New pins for hand-, wave-and selective soldering processes
  • All lead free
  • All with EMC improved technology
  • 100% downward compatible
  • Dual-channel driver core for up to 1200 V
  • ±6A gate current, +15 V/-8 V
  • 1 W @ 85°C per channel
  • On-board power supply
  • High reliability (reduced component count)First-class isolation technology
  • Partial-discharge-tested isolation technology
  • Delay time <100 ns, up to 50 kHz
  • Isolation coordination according to IEC 61800-5-1 and IEC 60664-1
  • UL Recognized Component
  • -20°C to +85°C (105°C with derating)
  • RoHS compliant
  • New pins for hand-, wave-and selective soldering processes
  • No change in electrical and mechanical performance
  • Available with Conformal Coating