IC selection for 80W LED driver design
Hi ,
I want to drive 80W led and for the i am looking for right IC from your website.
I found LinkSwitch-PH is look like the exact match but it only support 78W maximum but not the 80W design.
Any one have idea which IC can i use to active 80W design ?
I need to support following specification for 80W LED driver:
1. Max - Min Input Supply: 85 - 265 Vac (Normal Operating Voltage 230 Vac)
2. Max - Min output Voltage: 30 - 38 Vdc (Normal Operating Voltage 35 Vdc)
3. Max Load current: 2.30 Amp
4. Isolated Design (Flyback PFC if possible)
5. Efficency : > 80%
6. PFC: > 0.90
7. OVP, OCP, SCP protection
8. CC, CV design
9. PWM dimming
I want to support above specification with driver.
Which IC is the best mach for the above speicification ?
Thanks in advance for any responce.
--
Vishal
You may be able to push LinkSwitch-PH to 80W (need to verify with PIXLS).
However, LNK-PH does not support CV mode operation.