When you use a PIXLS design sheet for a particlar topology, can you show the actual schematic with the values?
Do the topology schematics come from the datasheet for the part you selected??
Thanks.
回應
While the PIXls design results do not calculate all schematic componenst it does calculate most of the important ones.
The topology for which these calculations are made is indicated in cell F1 and usually is the Flyback topology. IN certain cases there are other topologies used, Link-TN family for example has 2 spreadsheets one for Buck and another for Buck-boost
While the PIXls design results do not calculate all schematic componenst it does calculate most of the important ones.
The topology for which these calculations are made is indicated in cell F1 and usually is the Flyback topology. IN certain cases there are other topologies used, Link-TN family for example has 2 spreadsheets one for Buck and another for Buck-boost