PIEXPERT TNY280 POWER PROBLEM
Posted by: phd.nash
on
Hi,
Please see attached file.
As seen in picture TNY280 power values must be changed. Because Pmax(universal) must be lower than Pmax (230V). Other TNY members includes this rule.
This problem may affect the piexpert results.
Comments
Same problem exists in latest version.
Please check power capacity list by double clicking on the pi device when Enclosure is selected as Adapter.
You'll see that for tny280pn Pmax for Universal input is greater than Pmax for Sin230.
Maybe it doesn't effect results but it is confusing.
The latest release was an update to PIXls only. An update for PI Expert is on the way.
Thanks for bringing this to our attention. We'll look into it.