How to get 30 volts as Vout from LYT 1402-1604 (LYTSwitch-1 Family)
We have used LYT 1402-1604 (LYTSwitch-1 Family) to get the output voltage as 30 volt. We have use High-Side Buck circuit on figure 1a. of data sheet.
If the value of R7 is kept 402k ohm (as per figure 5 on page no 3, in Rev.B 07/16), we get Vout over 100 volt dc.
And if I choose R7 value to be 100k ohm, I get Vout as 75 volt DC constant.
Why when I chose the right value of R7, I do not get the expected voltage.
Also, how can I get 30 volt as Vout.