7-Segment with BCD LED Driver Problem
CL5631BW - 3 Digit 7 Segment Display
CD4511BE BCD LED Driver Decoder
The BCDA inputs are wired with 680 Ohm Resistor and the outputs are wired with 680 Ohm Resistors to the 7 Segment correctly.
All Numbers shown on the Display are inverted (All segments that should be illuminated are dark and vice versa).
I think the decoder is for Common Cathodes. Is it possible to change the mode for the decoder to Common Anode? Thank you in advance.
|CD4511BE BCD LED Driver Decoder||20.35 KB|