DPA switch
Posted by: jom
on
Hi, for a new design I need a power supply with input voltage range 18Vdc...50Vdc
2 separated outputs : 5V - 1.5A and 12V - 0.5A.
Is that possible with a DPA device (or another device)?
© 2024 Power Integrations. All Rights Reserved
DPA-Switch is specified down to 16 V so should work here.
I used parametric search
http://www.powerint.com/en/design-support/parametric-search#5000
and came up with
http://www.powerint.com/sites/default/files/PDFFiles/der120.pdf
which is a good starting point.
Cheers
PI-Chekov