솔루션 찾기 기술 지원

에어컨 및 보조 DC-DC 컨버터

Climate Control IconIn regular ICE vehicles additional loads were driven directly by the engine, either through belts or, for agricultural vehicles, a power takeoff shaft. These include the water and hydraulic pumps, air and A/C compressor, and alternator. In an EV cabin heating must be provided as waste heat from the engine is no longer available.

When moving to an electric vehicle, these loads must be powered electrically. Due to the high-power levels (kW’s) it is lower cost and more efficient to utilize the HV system voltage to do this.

Auxiliary HV DC-DC converters provide the low voltage supply rails from the, up to 950 V, HV system voltage for the control electronics driving each of these modules. In addition, there are other applications such as contactor control and on-board convenience inverters (for 120/240 VAC outlets) which are also powered from the HV system.

Both non-isolated buck and flyback and reinforced isolated flyback solutions from Power Integrations are ideal here, providing very low part count and small footprint solutions.

레퍼런스 디자인

관련 상품

Related Products
제품
데이터 시트
토폴로지
전압 레벨
설명
Topology Flyback, Secondary Side - FluxLink Regulated
Power Level 100 W
Description

750V, 900 V & 1700 V MOSFET 및 FluxLink 피드백이 통합된 자동차 애플리케이션용 CV/CC QR 플라이백 스위처 IC

Topology Non-Isolated Flyback, Buck/Boost/Buck-Boost
Power Level 850 mA
Description

적은 부품 수의 파워 서플라이를 위한 시스템 레벨 보호 기능이 통합된 자동차용 에너지 고효율 스위처 IC

추가 문서