Power supply design for 40W LED light using PH LNK419EG
Posted by: SUDSEGNAL
on
Power supply design for 40W LED light
following are the required specifications
input range = 170Vac to 308Vac
Required output power = 40W
Output Voltage = 17V, 2.1A
I would like to use PH LNK419EG for this project, so would request you to kindly give me the spreadsheet design for start with the design.
Thanks & Regards
Carlos
Attached is the PI spreadsheet for 17V_2.1A you requested using LNK419EG.
Please review the result, and let us know if you have any question with it.