1SP0635V2M1-FZ3600R17HP4 Power Supply
Posted by: HJS
on
Hello,
For a 1SP0635V2M1-FZ3600R17HP4 we would like to use a ISO5125-45 DC/DC converter as power supply, but its output voltage ist 25 V DC and the 1SP0635V2M1 requires 15 V DC. The bus voltage for the 1SP0635V2M1 is specified at 25 V DC, which is exactly the specification of the ISO5125-45.
Is it possible to use the ISO5125 with the 4-pin flat cable to supply the 1SP0635V2M1-FZ3600R17HP4?
Regards,
Hans-Joachim
Hi Hans-Joachim
The 1SP0635V2M1-FZ3600R17HP4 has an on-board DC/DC converter to provide the isolation between primary and secondary side, thus you can use a non-isolated power supply to power the driver.
Gate Driver Support