CC circuit

Posted by: Rishiket1081 on 09/05/2012

Hi, I am going to design a Led Driver 48V@350mA using TNY280PN , so need to add CC circuit ,so please tell me how to design CC ,and what should be the rating of transistor and about its regulation ?

Will be it within 10% or not ?

I don't want to use LKN-PH device.

Pls suggest assp.

Thanks

You can check the link below for a CC circuit using TinySwitch-III

http://www.powerint.com/sites/default/files/PDFFiles/di173.pdf

In DI-173 , transistor being used is of 40V and U2 is LM321, can we have the CC ckt with the help of two or three transistor MMST2222 , but my o/p is of 40V@350mA .

Please guide me, I want to go with transistor only.

Please suggest assp.

Thanks for your prompt response.

DER35 with link below can be used using single transistor and a zener diode.

http://www.powerint.com/sites/default/files/PDFFiles/der35.pdf

If you need a low drop cc, pls refer to the link below

http://www.powerint.com/sites/default/files/PDFFiles/der113.pdf

CC circuit

评论